• Instantaneous electric shower drawing water
direct
from the cold mains supply ideal for installations without stored
hot water and second bathrooms
• Consistent showering temperature is provided.
The
temperature stabilising device compensates for changes in the
incoming water pressure caused by other household fittings.
• Each shower has 3 power settings
(Cold, Warm and
Hot) and a separate temperature control
• On/Off is operated by a push button
ensuring
temperature setting remains unaffected after each use
• Safety warning lights
indicate both ‘low incoming
water pressure’ and ‘reduce temperature’, therefore the shower
should then be turned off or the temperature reduced
• Phased shutdown feature
ensures all hot water
is flushed out of the shower after use prolonging the shower life ,
this ensures limescale build-up is kept to a minimum, again this is
indicated by a warning light
• Available in 8.5kW (ES85), 9.5kW (ES95) and
10.34kW (ES104) versions
• 15mm Push fit swivel inlet elbow pipe
connection
enabling plumbing from five different directions
• Fully adjustable
riser kit
and 3 mode rub clean handset. The riser rail has a built
in spirit level to assist in fitting. Also as it fits flush against
the wall any previous fixing holes can be concealed.