 |
Universal single pumps
can be used in pairs to boost vented systems to pump hot and cold water
supplies independently, or as a single pump to boost a water supply as
required.
- Ideal for boosting
hot water service to a common mixer where the cold supply is mains
fed.
- Ideal for
boosting hot and cold supplies separately.
- Suitable for
increasing water pressure to a combi boiler via a break tank.
Technical Specification:
|
The Pump |
| Inlet strainer |
 |
| Stuart hard face mechanical
seal |
|
| Flow switch sensitivity |
approx. 0.6 l/min |
| Pressure switch |
|
| Max. inlet head |
8 metres |
| Plumbing connection |
G ¾ " male |
| Flexible hose |
G ¾ " female x 22 mm push-in
c/w isolating valves x 305 mm long |
| Anti vibration feet |
|
| |
|
| WRAS compliant |
|
| |
|
|
The Motor |
| Power Supply |
230/1/50 |
| Enclosure rating |
IPX4 |
| Motor |
Induction type, permanent
capacitor, auto resetting protective thermotrip |
| Power consumption |
250 Watts |
| Full load |
1.1 Amps |
| Fuse rating |
5 Amps |
| Pre wired |
|
| Rating |
Continuous (S1) @ 9 l/min and
above |
| |
|
| Gross weight (packed) |
7.8 Kg |
| 3 Year Guarantee |
United Kingdom only |
|
