| Ideal Standard TMV3 Valves |
|
| A thermostatic valve to supply premixed water to a set temperature to basin, bidet, bath or shower. Blenders are factory set to deliver water at 38 - 40 degrees Centigrade at 1 bar inlet pressure. Blenders are designed to be positioned under basin, bidet or bath immediately below the hot water inlet. |
| If you are looking to purchase the Disney Tap range, these are the valves that must be fitted with them. |
| Description | Image | Diagram | £(Chrome)incVAT | |
|
|
||||
| Basin Thermostatic Valve |
|
 |
|
£75.52 |
| Bath Thermostatic Valve |
|
 |
£83.02 |
|
| Basin Valves |
Operating pressures from 0.2 to 5.0 bar. Recommended supply temperatures, Hot 52-65 degrees Centigrade, Cold 5-20 degrees Centigrade. For best results both supplies should be at equal pressures. The valve is eminently suitable for multi point usage. The number of outlet points that can be served by one valve depend on the supply pressure, pipework and type of outlet; typically at 0.2 bar pressure - basin taps or 4 spray taps, at 1.0 bar pressure - 6 basin taps or 12 spray taps. Also TMV2 scheme approved |
|||
| Bath Valves |
Operating pressures from 0.2 to 5.0 bar. Recommended supply temperatures, Hot 52-65 degrees Centigrade, Cold 5-20 degrees Centigrade. For best results both supplies should be at equal pressures. The valve is eminently suitable for multi point usage. The number of outlets that can be served by one valve depends on the supply pressure, pipework and type of outlet; typically at 0.2 bar pressure the valve will deliver 10 litres per minute. Also TMV2 Scheme approved. |
|||
|
|
