|
NewTeam Electric Showers |
NT Installation Requirements
| Each
NewTeam shower is supplied with a comprehensive illustrated manual, which
takes you through each stage of the installation process.
NewTeam electric showers must be installed to a mains cold water supply with a minimum running pressure of 1.0 bar (14.5 psi). These showers are equally at home over a bath or in a shower enclosure and can be mounted easily to the wall using standard fixings.
|
|
|
|
The schematic drawing shows the basic recommended water and electrical connection requirements. A separate and permanently connected cable must be taken from the consumer unit directly to the shower via a double pole isolating switch. The installation must be in compliance with the latest IEE wiring regulations. |
