|
Mira Event XS (Manual) - All in one power shower by Mira |
|||||||||
|
|
|||||||||
|
Power showers by Mira - the Mira all-in-one Power Shower |
|||||||||
 |
Mira Event XS The slim and stylish Mira Event XS not only delivers safe and powerful showering, it is also one of the quietest mains voltage all-in-one power showers available today.
|
||||||||
| Over the past seventy years Mira Showers have become the
benchmark for unmatched quality and absolute reliability. But they’ve also
always taken great pride in our customer satisfaction. So before developing their new range of power showers, they questioned everyone involved; the outlets who sell them, the plumbers who install them and, of course, the people who use them. They listened…and learned. Which is why the new Mira Event XS Power Showers are quite simply in a class of their own. They’re quieter, easier to use (and install), safer, more powerful, with pin-sharp temperature control and sleek, stylish design. Affordable, power shower performance with Mira’s hallmark quality and reliability.
|
|||||||||
| Plumbing system compatibility: | Guarantee | |
| Gravity fed hot and cold water supplies | 1 year Optional 3 or 5 year |
| Better Power Delivers an impressive 14L/min flow, thanks to Mira’s patented High-Flow Efficiency System and the quietest, most reliable motor around... technology to ensure smooth, constant power showering. Better to Use Separate, high-precision flow and temperature controls. Better Design Slim and stylishly designed for maximum user comfort, the sleek new fittings offer one-handed height adjustment, wall-mounted soap dish and strong metal hose. The anti-scalehead offers 4 different spray modes (Start, Champagne, Massage and Eco). |
| x |
| x |
Limitations of use The Event must not be connected to a mains fed
water supply.The Event is not suitable for installation in
institutional applications. |
| The type of wall surface will affect
the perceived sound levels. Solid walls will provide a
quieter operation. At full flow (Boost position), with
the appliance installed on to a solid wall, the maximum
sound level can be expected to be in the region of 55dBA
when measured at a distance of 1 metre. This figure does
not include the noise generated by the spray from the
handset. |
| The Mira Event should not be used for
applications where an outlet flow control forms part of
the shower fitting. |
| The product and its components are
only suitable for normal water supplies and should be
cleaned only with mild washing up detergent or soap
solution. |
| x |
|
Application The Mira Event is suitable for installation as part of Gravity fed plumbing system only. Finish White/chrome or white. |
| x |
| Manual versionManual (non-thermostatic) control system.Adjustable maximum temperature stop.Maximum hot water temperature: 80ºC (BS 6700
recommends a maximum of 65ºC). |
| x |
| PressureMinimum maintained pressure: 0.0075 bar min
(75mm)Maximum maintained pressure 0.5 barMaximum static pressure: 1.0 barMaximum pressure loss ratio: 10:1 |
| x |
| Pumbing |
| Surface-mounted. |
| Inlet connections: 15mm dual entry
push-fit inlet connections. |
| Supports three inlet configurations;
top, bottom or back inlet supply. |
| Outlet connection: ½" BSP male |
| The storage cistern should have a
minimum storage capacity of 230 litres to provide
adequate showering time and to comply with BS6700
(1987). Insufficient storage may result in the pump
being run dry. |
| x |
| Electrical |
| Appliance power supply; 230V/240V,
50Hs, fused at 3 Amps, either via a double pole switched
fused connection unit (not supplied) with a minimum 33
contact separation in each pole. |
| Power supply connection; the Mira
Event is fitted with a terminal block and earth stud
which will accept cable up to 2.5mm2. |
| We recommend the inclusion of a 30ma
residual current device (RCD). This may be part of the
consumer unit or a separate unit. |
| Absorbed power: approximately 150
Watts under normal working conditions. |
| x |
| Maintenance |
| Maintenance should be carried out in
accordance with the information published in the
Installation, Operation & Maintenance Guide,
supplied with each product. This guide should be
retained by the user for future reference. |
| Conveniently situated isolating valves
must be fitted in the supply pipework to allow complete
maintenance of the product. |
| x |
| Approvals |
| Designed to comply with relevant
harmonised European standards. Mira Event is a BEAB
approved product |
| Year 2000 compliant. |
| x |
| GuaranteeGuaranteed for one year from purchase against
faulty materials or workmanship.Optional extended warranty available. Contact
Mira Customer Support. Supporting information Mira Event installation, Contact Mira customer support - 01242 262 888 |