Mira Gem  88

The Mira Gem 88 is a new manual mixer shower to replace the popular Mira 88 shower. 

Mira has introduced a bold new look, with a full chrome model available.

• Stunning new contemporary design

• Smooth, easy to use controls with new flow lever

• New all chrome variant

• Available in either White or Chrome

• Supplied with Mira Response shower fittings with adjustable spray patterns

• A choice of ev, biv or bir options

Gem 88 supplied complete with a Mira Response built-in shower head offering different spray patterns (Start, Soothe and Force).

Gem 88 supplied complete with a Mira Response adjustable spray handset offering different spray patterns (Start, Soothe and Force), hose, clamp bracket, soap dish, slide bar, outlet elbow and hose retaining ring/gel hook.

Gem 88 supplied complete with a Mira Response adjustable spray handset offering different spray patterns (Start, Soothe and Force), hose, clamp bracket, soap dish, slide bar and hose retaining ring/gel hook.

Mira Gem 88 is suitable for both high and low pressure systems with nominally equal water inlet pressures but SHOULD NOT be fitted with Combination Boilers.

• Manual (non-thermostatic) control
• Maximum hot water temperature: 85 degrees

• Maintenance should be carried out in accordance with the information published in the installation and user guide, supplied with each product. This guide should be retained by the user for further reference
• Conveniently situated isolating valves must be fitted in the supply pipework to allow complete maintenance of the product
• In-line strainers should be fitted to both inlet supplies unless the water supplies are guaranteed to be clean

• Minimum maintained pressure: 0.1 bar
• Maximum Maintained pressure: 5.0 bar
• Maximum static pressure: 10 bar

• Optional DCV-H; outlet double check valve is available for use with pressure above 0.2 bar, providing an alternative method of complying with water regulations

• The plumbing installation must comply with the requirements of UK Water regulations/Bylaws (Scotland). Building regulations or any particular regulations and practices, specified by the local water company or water undertakers. The installation should be carried out by a plumber or contractor who is registered, or is a member of an association
• Protect the product from damage whilst making soldered connections. Some fluxes can cause damage to plastic componants.
• All Mira Products include filtration to protect products against water debris.
• During installation all pipework should be fully flushed

• Guaranteed for one year from purchase against faulty materials or workmanship
• Optional extended guarantee available

• Mira Gem 88 Installation and User Guide P4449