| Mira Realm | |
 |
With its evocative traditional design and contemporary technology, the Mira Realm combines the best of both worlds. In short, exceptional style and performance.
|
 |
 |
|
|
Exposed Valve - Chrome |
Mira Realm - Gold finish |
 Thermostatic ½" antique style shower control with
maximum temperature stop.Automatic shutdown should the cold water supply fail.Single sequential control for selection of on/off and
temperature.Body and inlet fittings are manufactured from corrosion
resistant brass.Supplied complete with antique style shower fittings. |
| x |
| Mira Realm Surface mounted-shower control for connection to exposed pipework. |
| x |
|
Principle of operation This fully thermostatic shower control mixes hot and cold water to the desired showering temperature and automatically compensates for variation in both the temperature and pressure of the inlet water supplies to maintain the blend temperature |
| x |
| Limitations of Use |
| The Mira Realm should not be used
for applications where an outlet flow control forms
part of the shower fitting. |
| The product and its components are
only suitable for normal water supplies and should
be cleaned only with mild washing up detergent or
soap solution. Light golden products should be
cleaned using a soft damp cloth only. |
| x |
|
Application The Mira Realm is suitable for installation as part of the following plumbing systems: Gravity fedFully modulating instantaneous gas heatedMains pressurised (heated from a thermal
store)Unvented mains pressurePumped |
| When the Mira Realm is used with domestic fully modulating gas heater appliances at pressures above 3 bar maintained, a drop-tight pressure reducing valve is recommended to maintain performance. Refer to the plumbing schematic diagrams for its position. |
| x |
|
FinishChrome or light golden |
| x |
| Technical |
| Wax
capsule temperature sensor. |
| Automatic
shutdown to seepage with 2 seconds if cold supply fails. |
| Temperature
control range: 35ºC-45ºC |
| Maximum
hot water temperature:85ºC (BS6700 recommends a maximum of 65ºC). |
| Minimum
temperature differential: 10ºC (between blend and hot) |
| x |
|
PressureMinimum maintained pressure: 0.1 bar
(gravity fed) or 1.0 bar (gas water heater)Maximum maintained pressure 3.0bar maxMaximum static pressure: 10.0 barMaximum pressure loss ratio: 5:1 |
| x |
| Performance The specification performance outlined below is achieved with inlet water supply temperatures of 15ºC cold and 65ºC hot, and nominally equal inlet supply pressures: |
| The Mira Realm will effect a
shutdown to seepage if the cold supply fails |
| Shutdown to seepage is effected
even if the hot supply is only 10ºC above the blend
temperature. |
| x |
| Installation |
| Surface-mounted.360º swivel inlet connectors.Inlet connections: 15mm compression.Outlet connections: 15mm compressionReversed inlet connections supportedAlternative top or bottom outlet
supported.Horizontal arm may be shortened if
required. |
| x |
| Maintenance |
| Maintenance should be carried out
in accordance with the information published in the
Installation, Operation & Maintenance Guide,
supplied with each product. This guide should be
retained by the user for future reference. |
| Conveniently situated isolating
valves must be fitted in the supply pipework to
allow complete maintenance of the product. |
| x |
|
GuaranteeGuaranteed for one year from purchase
against faulty materials or workmanship.Optional extended warranty available.
Contact Mira Customer Support. |
| x |
| Supporting information |
| Mira Realm Installation, Operation
and Maintenance Guide P3052 is available prior to
purchase. Contact Mira Customer Support. |