|
Monsoon Shower Pumps |
2 Bar Single Impellor shower booster pump |
|
Shower Pumps by Stuart Turner |
|
 Stuart Turner MONSOON 2 Bar booster pump Monsoon
2.0 bar single high-pressure pump is driven by a continuously rated
thermally protected induction motor. The Monsoon 2.0 bar single is ideally
suited as an outlet pump installed between the shower valve and
showerhead. It can also be used to locally boost hot or cold water
supplies in both domestic and commercial premises. Supplied ready to
install the pump is fitted with a flow switch, which requires a minimum
flow rate of 0.5 l/min to operate. In situations where there is no flow
the pump can be started with the addition of an air or non-latching pull
cord switch. |
| Typical
Installation
|
Performance Curve
|
