|
Monsoon Shower Pumps |
3 Bar Single Impellor shower booster pump |
|
Shower Pumps by Stuart Turner |
|
 Stuart Turner MONSOON 3 Bar booster pump Monsoon
3.0 bar single high-pressure pump driven by a continuously rated thermally
protected induction motor. The Monsoon 3.0 bar single is ideally suited as
an outlet pump installed between the shower valve and showerhead. It can
also be used to locally boost hot or cold water supplies in both domestic
and commercial premises. Supplied ready to install the pump is fitted with
a flow switch, which requires a minimum flow rate of 0.5 l/min to operate.
In situations where there is no flow the pump can be started with the
addition of an air or non-latching pull cord switch. |
| Typical
Installation
|
Performance Curve
|
