Hot water when you need it

NewTeam 10.4kW

Instantaneous showers that draw water direct from a cold mains water supply and only heat the water that is used. Ideal for a second bathroom or for homes that do not have a stored hot water supply. Adjustable power settings. Cold (for a cool shower), Medium (for summer economy), and High (for full shower performance) in winter months when the cooler incoming cold water will reduce the flow rate. BEAB Approval of safety.

A Most electric showers draw water direct from a cold mains supply and heat it as it is used. NewTeam showers do this with maximum efficiency. This way, only the water used is heated, giving an economical shower, but still with great performance.

This means that electric showers can be fitted into homes where there is not a stored hot water supply. Simple to install, simple to use.

Features

• Phased shutdown
• Accessories and shower unit in brilliant white finish
• Mains fed water supply installation
• Rear, top, or bottom water and cable entry
• Temperature stabilisation
• Guarantee for two years (second year parts only)

1. Baseplate covers most retrofit installations

2. Indicators to show low incoming water pressure and if temperature selection is too high

3. Adjustable power settings, Cold, Medium and High

4. Stand-by light to show that the unit is fully operational and ready for use

5. Rub-clean feature handset for easy removal of limescale. Three adjustable spray settings

6. Separate temperature and power controls. Easy to grip levers

7. Modern flat-bar styled riser rail

8. Reinforced, easy-clean shower hose

9. Uprated pressure relief device

10. Easily accessible wall fittings

11. Unique pivot action inlet position. By simply unscrewing the clamp and lifting the outlet connection, the push-fit inlet can swivel 180 degrees, allowing access either side. No extra plumbing for retrofit installations

12. Top inlet position

13. Push-fit fittings