Renaissance Seated Shower Pod

One-Piece Shower Cubicles for alcoves

Designed specifically for installation into an alcove or recess. With a typical installation time of only 45 minutes, these units offer a stylish, highly effective solution to leak-free showering.

• Complete, one-piece leak proof design (no joints or sealant on the walls and shower base)

• Light weight, but reinforced with rigid construction

• Superb, clean styling with useful seat

• High Quality, High Gloss, acrylic finish

• Durable, easy to clean, stain resistant finish

• Integral shampoo and soap dishes (left or right hand corner position options)

• Optional three part sliding door

• Can be supplied with or without waste/overflow, riser rail and mixer taps

Installation:

This completely assembled unit simply requires hot and cold water supply and waste/drain pipe to be connected.

Typical Installation Time - 45 Minutes

The pod is designed to be installed into an alcove - a three-sided void. When installed and trimmed, the pod should seal against the outer edge of the void providing a neat finish.

Consideration must be given to the method with which you intend to connect your plumbing, as all pipework will be concealed. Connections will need to be made for hot and cold water supplies and the waste. By the nature of the pod construction this can prove difficult in some instances - remember, access underneath and to the rear of the pod is going to be tricky. Careful consideration to installation will avoid much frustration. Please seek advice if you have any doubts.

These pods require a walled void. They are not suitable for free-standing or open corner (two-sided) applications.

Due to the lack of support from the manufacturer, this Item is currently unavailable. Please take a look at Kinedo or Kubex Cubicles

Dimensions:

Special Order Item

Basic Pod - No Doors, Waste/Overflow or Shower Equipment

£613.94 inc VAT

Deluxe Pod - Includes Doors, Waste/Overflow and Showering Equipment

£812.22 inc VAT