Factors that
determine handing
For a corner enclosure - the
position of the waste outlet normally determines the handing of a tray.
Typically, the waste outlet is positioned in the rear corner of the tray
(closest to the adjoining structural walls).
Trays with a square edge - It
may be possible in a few situations to request the outlet in another
position. This is achieved by rotating the tray accordingly. This may
however compromise design functionality. Please check before ordering.
Trays with a ramped edge -
these may not be rotated in order to move the position of the waste.
Don't forget -
If you have any problems deciding RH or LH please don't hesitate to call
for assistance.
It is recommended - that you
provide a simple sketch to accompany your order to avoid mistakes. |