|
| Product Features | |||
 |
Power rating 8.5kW, 9.5kW or 10.5kW (nominal) |
|
|
|
Temperature stabilised * | ||
|
Flush fitting control panel and remote power pack** | ||
|
Push Start/Stop button with phased shutdown | ||
|
Temperature control with numbered dial | ||
|
Push button power selector for: Cold, Economy or High | ||
|
Low pressure indicator | ||
|
Power 'on' indicator | ||
|
Concealed pipe connections | ||
|
4 mode sprayhead | ||
|
Soap dish | ||
|
Available in White/Chrome, All White and White/Gold effect | ||
|
2 year guarantee | ||
|
Click an image to enlarge |
 |
 |
 |
 |
| T300si Electric | Power Pack | Front/Side view | Riser Rail |
 |
 |
||
| Internal 1 | Internal 2 |
| *Temperature stabiliser |
| Within a range of 2
bar to 10 bar, the selected shower temperature will remain within +/- 6
degrees C (conforms to EN 60335-2-35). Should water pressure or flow fall
below specified minimums shower temperature may fluctuate.
|
| **Power Pack |
| The T300si Power Pack
can be installed out of sight - under the bath, in an airing cupboard, or
in an adjacent location within 3.5 metres of the control panel. there are
two simple connections to make between the power pack and the control
panel. One is a cable which transmits instant response commands to the
power pack, and the other is a water pipe that supplies heated water from
the power pack to the shower. The power pack must not be installed above
the insulation of the house due to the possible exposure to freezing
conditions.
Full performance details, necessary site requirements and specifications are available by calling 024 7637 2222 |