|
Home Up Level Dec Door Options Linear Flo wet rooms Aqua Grade Wet Rooms Aqua-Dec Tilesafe Wet Room Fitting Wet Room and Shower Screens Wet Room Underfloor Heating Create Wet Room Screens
| |
|
Underfloor
Heating / Wet Room Underfloor Heating / Wet Rooms |
|
Devimat
Underfloor Heating |
|
DEVIMAT, THE BEST WAY TO
WARM A BATHROOM FLOOR |
 |
A tiled floor looks great,
it's hard wearing, hygienic and it's very practical. It is the natural
choice and an elegant solution for all bathrooms and en-suites, but they can
be cold and uninviting. With Devimat 100 heating system under your tiles
they will become warm and pleasant to walk on. The system offers more than
just warmth and comfort, it's energy efficient, with running costs much
lower than may expect. The mat design also ensures a quick and simple
installation. As well as a comfortable warm floor, the heat generated from a
Devimat will drift upwards and contribute to the room temperature. The
heating effect of any existing heating system can be reduced with
corresponding energy savings, but the Devimat should not be relied upon as a
primary source of heating. Ordering the Devimat 100 couldn't be simpler,
simply work out the area you need to cover, excluding any floor obstructions
like baths or sinks. Then choose the closest size mat available below your
measurement. |
|
Devimat
Size Calculator |
|
For your new warm floor you
simply need a mat and a thermostat |
|
Product code |
Area to be warmed (m2) |
Heating Load (watts) |
Price inc VAT |
|
The Devimat 100 The Devimat 100
is a self-adhesive mesh with an ultra-thin heating cable pre-attached which
is just 3.5mm thick. The mat design not only enables a fast installation,
but as the heating cables are already spaced out on the mesh, an even heat
is guaranteed across the whole floor, with no cold ripples. As the mat is so
thin, it can be installed within the thickness of the tile adhesive adding
no appreciable height to the floor. The mat is 500mm wide and is available
in various lengths.
Devireg 550
This controller is a combined thermostat
and timer which fits into a standard 47mm single socket box. The 550 is
programmed to monitor the floor temperature using the floor sensor which is
supplied with the controller and Devimat 100. The 550 is designed to be user
friendly and incorporates a 'one button does it all' technology. Each day
can be programmed individually to switch on when required thus ensuring
minimal running costs.
Safety
The Devimat heating cable meets the highest
UK and European standards and is the only thin heating cable with a complete
aluminium earth sheathing. The earth sheathing that surrounds the heating
controller is there for your protection and safety and is essential when
installing in your bathroom or wet room. |
|
DM1.0 |
1.0 |
100 |
£90.64 |
|
|
DM1.5 |
1.5 |
150 |
£103.59 |
|
|
DM2.0 |
2.0 |
200 |
£120.55 |
|
|
DM2.5 |
2.5 |
250 |
£141.99 |
|
|
DM3.0 |
3.0 |
300 |
£159.26 |
|
|
DM3.5 |
3.5 |
350 |
£177.69 |
|
|
DM4.0 |
4.0 |
400 |
£195.59 |
|
|
DM5.0 |
5.0 |
500 |
£221.39 |
|
|
DM6.0 |
6.0 |
600 |
£253.02 |
|
|
DM7.0 |
7.0 |
700 |
£282.95 |
|
|
DM8.0 |
8.0 |
800 |
£309.53 |
|
|
DM9.0 |
9.0 |
900 |
£325.50 |
|
|
DM10.0 |
10.0 |
1000 |
£336.38 |
|
|
DM12.0 |
12.0 |
1200 |
£417.91 |
|
|
Devireg
550 Electric Thermostat / Timer |
|
 |
|
DM550W................................. |
White |
£88.32 |
|
 |
 |
 |
 |
|
DM550S.................................. |
Silver |
£93.22 |
|
|
Installation Guidelines |
 |
 |
 |
 |
 |
| Step 1 |
Step 2 |
Step 3 |
Step 4 |
Step 5 |
|
The free area where the floor heating is to be
fitted must be measured to determine which size Devimat is needed. |
A groove is cut into the floor and wall
approximately 10mm deep and wide for the floor sensor and tube. The tube
allows for easy removal of the floor sensor required. |
Before laying the self adhesive mat, the
existing floor should be clean and dry, primed if necessary. Once the mat
has been tested, it is then rolled out and laid on the floor. |
Upon reaching the end of a mat run, simply cut
the mesh, turn the mat and lay the next piece beside the first. The red
heating cable must NOT be cut. |
Lay the tile adhesive and tiles in one
operation. A flexible tile adhesive and grout should always be used. |
|